DW802 Portable Edge Bander, 1000W, 220V/380V, 0.3–3MM Banding Thickness — engineered to complement automatic through-feed stations by handling curved and shaped panel edges that the main line skips. Deployable at any workstation or on-site with a compact 38×35×35CM footprint and 12KG weight, it processes ABS, PVC, melamine, and veneer without dedicated floor space or separate circuits.
Backed by four-stage QC with pre-shipment verification and a formal test record on your specified substrate and banding material before dispatch.
Patented Cutting Mechanisms — The DW802 portable edge bander incorporates proprietary glue application and trimming precision verified through four-stage QC, keeping supplementary edge work aligned with main-line tolerances.
| Parameter | Value |
|---|---|
| Model | DW802 |
| Product Type | Portable Edge Bander |
| Total Power | 1000W |
| Voltage & Frequency | 220V / 380V / Customizable (110V–440V) |
| Edge Banding Height | 0–50 mm |
| Edge Banding Thickness | 0.3–3 mm |
| Minimum Sheet Length | 25 cm |
| Minimum Sheet Width | 3 cm |
| Glue Pot Capacity | 1000 ml |
| Air Source Pressure | 0.5–0.8 MPa |
| Edge Trimming Power | 20W |
| Overall Dimensions (L×W×H) | 38 × 35 × 35 cm |
| Net Weight | 12 kg |
| Suitable Banding Tape | ABS, PVC, Melamine, Veneer |
| Standard Operation | Curved and straight edge banding |
| Language Options | Chinese, English, Customizable (Spanish, French, etc.) |
| Plug Options | EU, USA, AU, UK |
| Application | Material or Output |
|---|---|
| Furniture production line supplementary station | MDF and particleboard panels with PVC or ABS edging on curved profiles |
| On-site interior decoration and joinery | Plywood and blockboard cabinet components requiring melamine or veneer tape |
| Custom cabinet rework and small-batch finishing | Solid wood panels with shaped edges where automatic through-feed machines cannot reach |
| Phased workshop investment | Mixed substrates handled manually before upgrading to automated edge banding stations |
A portable unit is not a smaller automatic machine — it fills the gap the automatic leaves behind.
When a furniture factory scales its line, the automatic edge bander handles straight panels at high feed rates, but curved components, odd-shaped shelving, and on-site rework still fall to hand tools. I have seen production schedules stall because a batch of radius-front cabinets had to wait for manual trimming after the main line already cleared the floor. A portable edge bander production line setup means the DW802 picks up those irregular pieces without pulling operators away from the main stations, keeping throughput balanced across the workshop [NEED_CITE: typical bottlenecks in mixed-panel furniture lines].
In a complete line layout, the portable edge bander production line concept positions the DW802 downstream of the panel saw and near the assembly benches. Straight panels pass through the automatic edge bander; shaped panels and rework pieces route to the DW802 station. This prevents a single bottleneck from holding up the entire line while curved components wait for a dedicated machine that may not justify its floor space.
Line planners often overlook that manual feed rates vary by operator skill and panel complexity. The DW802 handles edge banding heights from 0 to 50 mm and thicknesses from 0.3 to 3 mm, covering the same PVC, ABS, and veneer tape the main line processes. Matching throughput is less about speed parity and more about ensuring curved-panel volumes do not queue up faster than the portable station can clear them [NEED_CITE: manual feed rate variance in workshop scheduling].
The 1000W total power draw means the DW802 can share a circuit with auxiliary equipment without requiring a dedicated breaker — useful when floor space limits where the unit sits. The 0.5–0.8 MPa air requirement aligns with standard workshop compressed air systems, so the portable unit taps into the existing ring main rather than needing a separate compressor. Glue pot capacity at 1000 ml allows continuous work through a batch of curved panels without mid-run refills, and the 0.3–3 mm thickness range ensures that the same tape inventory stocked for the automatic edge bander feeds directly into this station. For workshops processing veneer alongside PVC, the temperature and feed characteristics differ, but the DW802 accommodates both within its stated range.
Factories that try to route every panel through the automatic edge bander — including curved pieces — end up with inconsistent glue lines, tape lifting on tight radii, and rework loops that pull finished panels back off the assembly bench. I once saw a cabinet line lose an entire shift because radius-front doors kept jamming the automatic feed mechanism. A portable unit absorbing that overflow prevents the main machine from being misused beyond its design intent [NEED_CITE: rework costs from edge banding misapplication on curved panels].
In-house manufacturing with patented mechanisms means the DW802 is built to the same tolerance standards as the larger automatic stations in the catalog. Voltage customization from 110V to 440V ensures the portable unit matches the existing line infrastructure without transformers. Full-range product families allow a workshop to start with portable units and scale into automatic edge banders from the same supplier, maintaining documentation and spare parts compatibility. Four-stage QC with pre-shipment verification covers the portable unit with the same factory test protocol applied to full-line equipment. Engineer-led configuration ensures the unit is matched to the buyer’s actual substrate mix and production volume before the order is placed.
To size the DW802 correctly within your production workflow, share your panel material types, the proportion of curved versus straight components in a typical batch, your existing compressed air capacity, and the local voltage and frequency at the installation site. If you are running mixed substrates, sending sample panels and your preferred edge banding tape for a pre-shipment test ensures edge quality matches the output standard of your main edge banding station.
Q: How does the manual feed pace of the DW802 align with an automatic edge bander in the same line?
A: The DW802 handles curved and irregular panels that the automatic station cannot process, so throughput alignment depends on the proportion of shaped components in your daily mix rather than matching feed speeds. Line planners typically route shaped panels to the portable unit as a parallel station, preventing the automatic machine from being slowed or jammed by out-of-spec profiles.
Q: Which edge banding materials does the DW802 handle within a mixed-material production line?
A: The unit processes ABS, PVC, melamine, and veneer tape from 0.3 to 3 mm thick, covering the same material range stocked for automatic edge banders. This allows workshops to maintain a single tape inventory across both manual and automatic stations, simplifying procurement and reducing the risk of loading the wrong material at either station.
Q: Can the portable unit run on the same voltage as the main production line?
A: Voltage is configurable from 110V to 440V to match the existing line electrical standard, avoiding the need for separate transformers or dedicated circuits. Confirming the local voltage and frequency before shipment ensures the DW802 arrives ready to plug into the workshop supply without commissioning delays [NEED_CITE: voltage and frequency standards by export market].
Q: What floor space and air supply does the DW802 require, and can it share line infrastructure?
A: At 38 × 35 × 35 cm and 12 kg, the unit sits on any standard workbench and draws compressed air from the workshop ring main at 0.5–0.8 MPa. No dedicated floor space or separate compressor is needed, which keeps the line layout flexible when production volumes shift between straight and curved panel batches.
Q: Can we send sample panels for a pre-shipment test to verify edge quality?
A: Yes. Sending your actual substrate and preferred banding tape allows a factory test run before dispatch, verifying that glue adhesion and trim quality on your materials match the standard set by your main edge banding station. The test record ships with the unit as part of the pre-shipment verification documentation.
* Detailed technical specifications vary by model. Contact us for the full parameter sheet and customization options.
Heavy-duty wooden crate with moisture-proof lining and steel strapping. Seaworthy standard for safe ocean freight.
Standard models: 15-20 working days. Custom OEM orders: 25-35 working days from deposit confirmation.
FOB Qingdao / Tianjin. EXW, CIF available. T/T, L/C, Western Union accepted. Flexible payment terms for long-term partners.
We export to 100+ countries across Europe (Germany, Spain, Italy), Americas (USA, Mexico, Brazil, Argentina), Southeast Asia (Vietnam, Indonesia, Thailand), Africa (Nigeria, Egypt, South Africa), and the Middle East. Full customs documentation and export compliance support included.
Your logo on machine body, control panel and packaging. Full white-label production available.
Support 110V/60Hz, 220V/50Hz, 380V/50Hz, 440V/60Hz and other local electrical standards.
Modify table size, motor power, cutting capacity and other parameters per your production requirements.
Control panel available in English, Spanish, French, Arabic, Russian and other languages on request.
Custom paint color, machine casing design and aesthetic modifications to match your brand identity.
Bundled tooling sets, spare parts kits, installation tools and custom accessories for your market needs.
Fill in your requirements and our sales team will respond within 24 hours with a formal quotation and full technical specifications.
