DW-3600GF Automatic Edge Banding Machine, 380V, 0-14 m/min, 0.3-3 mm Edge Thickness — integrates six processing stations from gluing to polishing within one compact 2200 mm footprint.
Engineer-led line configuration with formal quotation within 24 hours ensures this edge banding station fits your phased investment plan.
Integrated Multi-Station Design — the DW-3600GF consolidates six edge processing steps into one footprint, eliminating the throughput mismatches that stall furniture production lines when machines are sourced piecemeal.
| Parameter | Value |
|---|---|
| Model | DW-3600GF |
| Product Type | Automatic Edge Banding Machine |
| Rated Power | 4.9 kW |
| Voltage & Frequency | 380V three-phase four-wire (other voltages available on request) |
| Feed Speed | 0–14 m/min (variable) |
| Edge Band Height Range | 0–50 mm |
| Edge Band Thickness Range | 0.3–3 mm |
| Minimum Plate Length | 200 mm |
| Trimming Power | 800 W × 2 at 24,000 r/min |
| Polishing Power | 400 W × 2 |
| Air Supply Requirement | 0.4–0.6 MPa |
| Overall Dimensions (L×W×H) | 2200 × 650 × 1250 mm |
| Net Weight | 320 kg |
| Control System | Multilingual operation panel (Chinese, English, Spanish or customized) |
| Plug Options | EU, USA, AU, UK |
| Key Features | Gluing, front and rear trimming, scraping, polishing, vacuuming |
| Application | Material or Output |
|---|---|
| Custom furniture panel edge banding | MDF, particleboard with PVC or veneer banding |
| Cabinet door and drawer front processing | Melamine-faced board with 0.4–2 mm PVC edge |
| Wardrobe and shelving panel finishing | Plywood and blockboard with thin veneer strips |
| Small-batch office furniture runs | Laminated panels requiring straight edge sealing |
A two-centimetre mismatch between your panel saw discharge and the edge bander infeed will stop an entire line on day one.
I learned this the hard way when configuring a line for a panel furniture plant overseas. The saw and the edge bander were ordered from different suppliers, and nobody checked the transfer height until both machines were bolted to the floor. Panels jammed at the infeed roller, operators had to lift each board manually, and the line sat idle while shims and conveyor adjustments were fabricated on site [NEED_CITE: common material handling mismatches in multi-vendor production lines]. When planning an automatic edge banding machine production line, the transfer geometry between stations deserves as much attention as the processing specs of each individual unit.
The 0–14 m/min variable feed speed on the DW-3600GF is not just a range figure; it is the parameter that lets you synchronise the edge banding station with the output cadence of an upstream panel saw and the intake rhythm of a downstream boring machine. If your saw pushes panels faster than the bander can accept them, work-in-progress piles up and panels risk surface damage from stacking. Run the bander too fast relative to the saw, and operators stand idle waiting for the next board. The variable drive lets the line planner dial in a feed rate that keeps material moving without bottlenecks at either handoff point.
Gluing, front trimming, rear trimming, scraping, polishing and vacuuming are handled inside the 2200 mm length of this unit. In a phased investment scenario, that means the edge banding station can be installed as a self-contained cell. Panels enter raw-cut and leave finished on the edge — no secondary trimming table, no separate scraping bench taking up floor space. When the line later adds a boring station or a CNC router downstream, the DW-3600GF has already closed its own process loop, so the new equipment slots in without re-routing material flow [NEED_CITE: phased capital investment strategies in panel furniture manufacturing].
The trimming motors run at 24,000 r/min with 800 W each, which provides clean shear cuts on PVC and thin veneer without tearing the substrate edge. Lower RPM trimming heads tend to chip melamine surfaces, especially on particleboard where the core is less cohesive. The 0.3–3 mm band thickness range covers the PVC profiles most custom furniture factories specify for cabinet carcases and the veneer strips used on visible wardrobe panels. Air pressure at 0.4–0.6 MPa is standard shop air; if your compressor already feeds other pneumatic tools, no separate supply is needed. The 0–50 mm band height range accommodates everything from thin drawer sides to thicker shelving panels without tooling changeovers.
When a single edge bander is purchased without confirming how it interfaces with the rest of the line, the consequences compound. Panels that are too short fall below the minimum plate length and jam the feed chain. Voltage mismatches mean the machine arrives and the main contactor will not engage. Control panels in a language the operator cannot read delay commissioning by days while translated overlays are sourced [NEED_CITE: operator interface language barriers in imported machinery commissioning]. These are not engineering defects in the machine itself — they are planning gaps that surface only after the crate is opened.
The DW-3600GF is offered within a product family that spans entry-level to full-function pre-milling models, so a workshop can add stations over time without switching suppliers. Voltage is configurable beyond the standard 380V three-phase, and the control panel language is confirmed before production rather than assumed. A four-stage quality check covers incoming components, in-process assembly, finished unit testing and pre-shipment verification. Engineers review upstream and downstream interface dimensions before finalising the line layout, reducing the on-site surprises that come from piecemeal procurement.
Share your panel material types and the thickness range you process most often, along with the daily volume target for the edge banding station. Confirm your facility voltage and frequency so the electrical package is built correctly from the start. If you already have a panel saw or boring machine on the floor, provide the model and discharge height so the transfer interface can be checked before the line layout is finalised.
Q: How do I verify that the feed speed matches my other line stations?
A: Start with the output rate of your upstream panel saw in panels per minute, then calculate the linear feed rate needed at the edge bander based on average panel length. The DW-3600GF covers 0–14 m/min, which accommodates most small-to-medium furniture line cadences. We confirm the target feed rate during line layout planning and set it during commissioning.
Q: What voltage and frequency options are available for different export markets?
A: The standard configuration is 380V three-phase four-wire, but the unit can be built for other voltage and frequency combinations on request. Confirm your local supply specifications early so the motor windings, contactors and control transformer are matched before assembly begins. A voltage confirmation document is included in the shipping package.
Q: How much floor space should I allocate around the edge banding station?
A: The machine itself occupies 2200 × 650 mm, but you need clearance on both the infeed and outfeed sides for panel handling and operator access. Plan for at least one metre of clear space on each end and along the operator side. We provide a layout drawing showing the recommended envelope during the quotation stage.
Q: Can I add this edge bander now and expand the line later?
A: Yes. Because the DW-3600GF completes all six edge processing steps internally, it functions as a standalone cell. When you are ready to add a boring machine or CNC router, the existing station does not need repositioning. We design the initial layout with future expansion corridors marked so material flow remains uninterrupted.
Q: What spare parts should I keep on hand for continuous line operation?
A: Trimming cutters and polishing wheels are the primary consumables. The spare parts list supplied with the machine identifies exact part numbers and recommended stock quantities based on your production volume. We also supply wear items like feed chain pads and pressure rollers so that a single component failure does not halt the entire line.
* Detailed technical specifications vary by model. Contact us for the full parameter sheet and customization options.
Heavy-duty wooden crate with moisture-proof lining and steel strapping. Seaworthy standard for safe ocean freight.
Standard models: 15-20 working days. Custom OEM orders: 25-35 working days from deposit confirmation.
FOB Qingdao / Tianjin. EXW, CIF available. T/T, L/C, Western Union accepted. Flexible payment terms for long-term partners.
We export to 100+ countries across Europe (Germany, Spain, Italy), Americas (USA, Mexico, Brazil, Argentina), Southeast Asia (Vietnam, Indonesia, Thailand), Africa (Nigeria, Egypt, South Africa), and the Middle East. Full customs documentation and export compliance support included.
Your logo on machine body, control panel and packaging. Full white-label production available.
Support 110V/60Hz, 220V/50Hz, 380V/50Hz, 440V/60Hz and other local electrical standards.
Modify table size, motor power, cutting capacity and other parameters per your production requirements.
Control panel available in English, Spanish, French, Arabic, Russian and other languages on request.
Custom paint color, machine casing design and aesthetic modifications to match your brand identity.
Bundled tooling sets, spare parts kits, installation tools and custom accessories for your market needs.
Fill in your requirements and our sales team will respond within 24 hours with a formal quotation and full technical specifications.
