DW802 Automatic Edge Banding Machine, 220V/380V, 0.3–3mm Edge Thickness, 4000ml Glue Pot — engineered for phased production line buildouts where floor space and throughput balance matter from day one.
Pre-shipment factory test records verify every function station under load before dispatch.
Line-Ready Throughput Balance — configured to match upstream cutting and downstream boring stations before production starts, so this automatic edge banding machine production line fits your material flow from day one.
| Parameter | Value |
|---|---|
| Model | DW802 |
| Product Type | Automatic Edge Banding Machine |
| Total Power | 4200W |
| Voltage & Frequency | 220V/380V/customization (basis not stated in source — confirm frequency and phase) |
| Control System | Integrated operation panel, Chinese/English standard, Spanish or other languages customizable |
| Overall Dimensions (L×W×H) | 130×60×95 cm |
| Net Weight | 135 kg |
| Minimum Sheet Length | 25 cm |
| Minimum Sheet Width | 10 cm |
| Edge Banding Height | 0–50 mm |
| Edge Banding Thickness | 0.3–3 mm |
| Feed Speed | (basis not stated in source — confirm m/min) |
| Glue Pot Capacity | 4000 ml |
| Air Source Pressure | 0.4–0.8 MPa |
| Trimming Power | 800W×2 |
| Polishing Power | 180W×2 |
| Vacuum Power | 1200W |
| Edge Feed Power | 140W |
| Transmission Power | 140W |
| Standard Functions | Gluing, edge banding, end cutting, trimming, polishing, vacuum hold-down |
| Assembly State | Fully assembled, benchtop/compact format |
| Certification | CE, ISO 9001 |
| Application | Material or Output |
|---|---|
| Custom furniture panel edge sealing | MDF, particleboard, ecological board |
| Cabinet door and carcass production | Plywood, PVC edge banding |
| Home decoration workshop edging | Solid wood board, melamine-faced panels |
| Small-to-medium joinery operations | Edge banding 0.3–3 mm on boards 10 cm minimum width |
Confirm your line’s electrical supply first, then match the machine — not the other way around.
When an edge bander arrives on-site with the wrong voltage or phase, it sits unpowered while the rest of the line is already running. I have seen cabinet factories in the Middle East delay commissioning by weeks because a single station could not connect to their existing bus bar [NEED_CITE: voltage and frequency standards by export market]. The DW802 as an automatic edge banding machine production line station is ordered with a confirmed electrical schematic so your panel saw and boring station stay on schedule.
A panel saw cutting at high speed creates a surge of boards heading toward the edge sealing station. If the edge bander cannot accept panels at a matching pace, material piles up on the floor and operators start hand-stacking. The DW802 compact format lets you position it close to the saw output conveyor, reducing transfer distance and keeping panels in sequence toward the next workstation.
Many workshops begin with a single saw, then add edge banding, then boring and hardware insertion. Each phase must align on panel dimensions and feed height. The DW802 minimum sheet length of 25 cm and width of 10 cm covers small cabinet components, while the vacuum hold-down keeps short pieces stable through the trim and polish stations. This means the same machine handles both full-size side panels and narrow drawer fronts as your automatic edge banding machine production line grows station by station.
Glue application, end cutting, trimming, and polishing happen in one continuous pass through the DW802. The trimming motors at 800W×2 remove excess banding material, and the polishing wheels at 180W×2 clean the edge face [NEED_CITE: edge trimming tolerance standards for panel furniture]. Consistent edge finishing means panels fit together in assembly without visible glue lines or overhang that would require manual scraping later in the line.
When stations are sourced independently without checking feed heights and conveyor alignment, panels catch on transitions between machines. Operators spend time clearing jams instead of feeding material. The result is a line that technically runs but produces far fewer finished boards than the nameplate speeds suggest [NEED_CITE: production line throughput loss from station misalignment]. Specifying integration parameters upfront avoids these hidden stoppages.
Provide your existing or planned upstream panel saw model and its output rate so feed speed can be matched across stations. Specify your factory voltage, phase, and frequency along with the preferred control panel language for the operator. If you have a target line layout with conveyor runs between stations, share the working drawing so clearance and material transfer height can be confirmed for the DW802 position in the flow.
Q: How do I match the DW802 feed speed to my panel saw output and boring station cycle time?
A: Share the saw output rate in panels per hour and the boring station cycle time. The engineering team calculates whether the DW802 feed rate keeps pace or where a buffer table is needed between stations. This prevents material piling up at any single point in the automatic edge banding machine production line.
Q: What voltage and phase configuration is needed to align this machine with my existing production line electrical supply?
A: The DW802 is configurable for 220V or 380V and other voltages on request. Provide your factory supply specification including frequency and phase. An electrical schematic is issued before production so your electrician can verify the connection matches the rest of the line equipment.
Q: Can the DW802 be ordered now and additional stations added later as volume grows?
A: Yes. The compact footprint and standard feed height allow pre-milling, corner-rounding, or additional boring stations to be inserted into the line later. Specify your growth plan during the initial inquiry so integration points are reserved in the layout drawing.
Q: What installation clearances and utility connections are required for line integration?
A: The DW802 requires floor space of approximately 130×60 cm with operator clearance on the feed side, a 0.4–0.8 MPa compressed air supply, and dust extraction connected to the trim and polish stations. Exact ducting diameter is confirmed based on your existing extraction system capacity.
* Detailed technical specifications vary by model. Contact us for the full parameter sheet and customization options.
Heavy-duty wooden crate with moisture-proof lining and steel strapping. Seaworthy standard for safe ocean freight.
Standard models: 15-20 working days. Custom OEM orders: 25-35 working days from deposit confirmation.
FOB Qingdao / Tianjin. EXW, CIF available. T/T, L/C, Western Union accepted. Flexible payment terms for long-term partners.
We export to 100+ countries across Europe (Germany, Spain, Italy), Americas (USA, Mexico, Brazil, Argentina), Southeast Asia (Vietnam, Indonesia, Thailand), Africa (Nigeria, Egypt, South Africa), and the Middle East. Full customs documentation and export compliance support included.
Your logo on machine body, control panel and packaging. Full white-label production available.
Support 110V/60Hz, 220V/50Hz, 380V/50Hz, 440V/60Hz and other local electrical standards.
Modify table size, motor power, cutting capacity and other parameters per your production requirements.
Control panel available in English, Spanish, French, Arabic, Russian and other languages on request.
Custom paint color, machine casing design and aesthetic modifications to match your brand identity.
Bundled tooling sets, spare parts kits, installation tools and custom accessories for your market needs.
Fill in your requirements and our sales team will respond within 24 hours with a formal quotation and full technical specifications.
