ST-50 Small Curved and Straight Edge Banding Machine, 0.3–3 mm band thickness, 0–50 mm height, 220V/380V customizable — designed for phased line builds where curved and straight contour stations must integrate without feed-height conflicts. Compact 50 × 50 × 47 cm footprint allows flexible insertion into existing layouts, while voltage customization ensures compatibility with regional power standards. Four-stage QC with pre-shipment verification and formal electrical schematics provided before dispatch.
Compact Footprint Integration — verified at 50×50×47 cm bench footprint, the ST-50 edge banding machine production line slots into phased factory layouts without forcing upstream or downstream stations to re-route material flow.
| Parameter | Value |
|---|---|
| Model | ST-50 |
| Product Type | Small Curved and Straight Edge Banding Machine |
| Rated Power | 1000W |
| Voltage & Frequency | 220V/380V/customization |
| Edge Banding Height Range | 0–50 mm |
| Edge Banding Thickness Range | 0.3–3 mm |
| Minimum Sheet Length | 25 cm |
| Minimum Sheet Width | 3 cm |
| Edge Motor Power | 20W |
| Glue Pot Capacity | 1000 ml |
| Air Source Pressure | 0.5–0.8 MPa |
| Overall Dimensions | 50 × 50 × 47 cm |
| Net Weight | 22 kg |
| Assembly State | Tabletop / compact bench unit |
| Key Features | Curved and straight edge banding; manual trimming operations |
| Language Options | Chinese, English; Spanish and other languages available on request |
| Plug Options | EU, USA, AU, UK |
| Standards | CE / ISO 9001 (basis to be confirmed with manufacturer) |
| Application | Material or Output |
|---|---|
| Small-scale furniture panel edge banding | MDF, particleboard, plywood |
| Curved contour edge processing | Solid wood board, ecological board |
| Home decoration on-site repair banding | PVC and veneer edge banding on pre-cut panels |
| Phased line build — initial edge station | Panel stock entering from sliding table saw or panel saw upstream |
| Workshop transitioning from manual to machine banding | Small-batch cabinet components, drawer fronts, shelf boards |
Confirming local voltage and frequency before confirming the machine prevents a production line station that arrives electrically incompatible with the workshop bus bar.
I have watched factories receive edge banders wired for 380V three-phase when the workshop only had 220V single-phase capacity at that station. The machine sat crated for weeks while an electrician re-routed supply. When you are building an edge banding machine production line in stages, each new station must match the existing panel board without demanding a facility-wide rewire. The ST-50 supports 220V and 380V configurations with customization available, but that flexibility only helps if the buyer states the requirement before production begins [NEED_CITE: voltage and frequency standards by export market]. A mismatch at the edge banding station stalls not just that machine but every panel stacking up from the upstream saw.
The ST-50 occupies a 50×50×47 cm bench envelope, which matters when you are inserting an edge banding machine production line station between a sliding table saw outfeed and a multi-boring machine infeed. Panels move from cutting to banding to drilling, and if the edge station footprint forces a right-angle turn or a temporary stacking zone, the entire line rhythm breaks. This unit sits on a standard workbench, keeping the material path linear and the operator’s reach short.
A joinery workshop moving from hand tools to mechanized output rarely funds an entire edge banding machine production line on day one. The ST-50 serves as a credible starting station — it handles both curved and straight contours, so the shop does not need to purchase two separate machines at the outset. As volume grows and additional stations come online, the ST-50 can migrate to a secondary role handling rework and curved pieces while a larger automatic bander takes the primary straight-run workload.
A 1000 ml glue pot on the ST-50 sets a practical boundary for continuous operation at the edge banding station. In a phased edge bander production line, this capacity suits short-batch runs and repair work rather than full-shift production. The operator monitors glue level and refills between batches, which keeps the station honest about its throughput role [NEED_CITE: edge banding glue consumption rates relative to pot size]. Matching this rhythm to the upstream saw output prevents panels from piling past the outfeed table.
Buying a single edge bander without checking its infeed height against the sliding table saw outfeed and the boring machine table creates a step that operators compensate for manually, slowing every panel. The ST-50 sits at bench height, so the line planner must confirm that upstream and downstream surfaces align or install transfer rollers at matching elevation. A height mismatch at one station cascades into handling fatigue and panel surface damage across every shift [NEED_CITE: material handling alignment in woodworking production lines].
In-house manufacturing with patented cutting mechanisms means the edge trimming quality on the ST-50 is verified at the factory rather than adjusted on arrival. The four-stage QC process — incoming material, in-process, finished product, and pre-shipment verification — catches tolerance drift before the machine ships. Voltage and language customization are treated as standard configuration inputs, not special requests, so the operator panel reads in the language your floor team actually uses. Engineer-led configuration recommendations arrive within 24 hours of inquiry, mapping the ST-50 against your existing saw and boring station specs. Factory visits are open, letting you run your own panel stock on the machine before committing.
To match the ST-50 correctly within your edge banding machine production line, share the panel materials and thickness ranges you process, the existing upstream saw and downstream boring station models with their feed heights, and your workshop voltage and frequency at the intended installation point. If you plan a phased line build, note which future stations you anticipate adding and the approximate timeline, so the configuration accounts for eventual throughput requirements.
Q: How do I verify the ST-50 throughput matches my upstream saw output?
A: Throughput on the ST-50 depends on panel thickness, edge banding material, and operator feed pace during manual trimming. Share your sliding table saw cycle time and typical panel dimensions so the engineer can map whether this station keeps pace or becomes the bottleneck in your edge bander production line configuration.
Q: Can the voltage be configured for my country’s industrial supply standard?
A: The ST-50 supports 220V and 380V configurations with customization available. State your workshop voltage, phase, and frequency at inquiry so the electrical schematic and plug type match your existing supply without requiring an on-site transformer or panel board modification.
Q: How does this edge station integrate with a phased line investment plan?
A: The ST-50 handles both curved and straight banding, covering two functions in one station. As your line grows, it can shift to rework and contour duty while a larger automatic bander takes the main straight-run volume, preserving your initial investment through role migration.
Q: What are the floor space and utility requirements for installation?
A: The 50×50×47 cm footprint fits a standard workbench. You need a dedicated electrical circuit at the confirmed voltage and a compressed air line delivering 0.5–0.8 MPa. No special foundation or floor anchoring is required for this 22 kg tabletop unit.
* Detailed technical specifications vary by model. Contact us for the full parameter sheet and customization options.
Heavy-duty wooden crate with moisture-proof lining and steel strapping. Seaworthy standard for safe ocean freight.
Standard models: 15-20 working days. Custom OEM orders: 25-35 working days from deposit confirmation.
FOB Qingdao / Tianjin. EXW, CIF available. T/T, L/C, Western Union accepted. Flexible payment terms for long-term partners.
We export to 100+ countries across Europe (Germany, Spain, Italy), Americas (USA, Mexico, Brazil, Argentina), Southeast Asia (Vietnam, Indonesia, Thailand), Africa (Nigeria, Egypt, South Africa), and the Middle East. Full customs documentation and export compliance support included.
Your logo on machine body, control panel and packaging. Full white-label production available.
Support 110V/60Hz, 220V/50Hz, 380V/50Hz, 440V/60Hz and other local electrical standards.
Modify table size, motor power, cutting capacity and other parameters per your production requirements.
Control panel available in English, Spanish, French, Arabic, Russian and other languages on request.
Custom paint color, machine casing design and aesthetic modifications to match your brand identity.
Bundled tooling sets, spare parts kits, installation tools and custom accessories for your market needs.
Fill in your requirements and our sales team will respond within 24 hours with a formal quotation and full technical specifications.
