ST-30 Portable Edge Banding Machine, 220V/380V, 0.3–3mm Edge Thickness — handles both straight and curved edges in one compact unit (38×35×35cm), integrating into phased production line layouts without overhauling existing sawing or boring stations. Voltage and plug type confirmed at order stage to match your factory's electrical infrastructure.
Pre-shipment test records verify banding performance on your specified substrate before dispatch.
Engineer-led line configuration — Every ST-30 portable unit ships with a confirmed electrical schematic and voltage match, eliminating the downtime that occurs when a single machine arrives incompatible with the rest of the floor.
| Parameter | Value |
|---|---|
| Model | ST-30 |
| Product Type | Portable Edge Banding Machine |
| Total Power | 1000 W |
| Voltage & Frequency | 220V / 380V / customization available |
| Edge Type | Straight and curved edge |
| Suitable Edge Banding Tape | ABS, PVC, Melamine, Veneer |
| Edge Banding Thickness | 0.3 – 3 mm |
| Edge Banding Height | 0 – 50 mm |
| Minimum Sheet Length | 25 cm |
| Minimum Sheet Width | 3 cm |
| Glue Pot Capacity | 1000 ml |
| Air Source Pressure | 0.5 – 0.8 MPa |
| Product Size | 38 × 35 × 35 cm |
| Product Weight | 12 kg |
| Language Options | Chinese, English, customizable to Spanish or other languages |
| Plug Options | EU, USA, AU, UK |
| Standards | CE, ISO 9001 |
| Application | Material or Output |
|---|---|
| Small-scale furniture panel edge finishing | MDF and plywood with PVC or ABS tape |
| Interior decoration workshop production | Melamine-faced board with matching edge band |
| Custom cabinetry curved-edge finishing | Solid wood and veneer edge banding on shaped panels |
| Joinery workshop scale-up from manual work | Particleboard and plywood with straight and curved profiles |
| On-site cabinet installation touch-up | Pre-cut panels requiring portable straight or curved edge sealing |
A machine wired for the wrong frequency will overheat the glue pot and fail within the first production shift.
I have watched workshops in South America receive edge banders built for 380V/50Hz when their local supply runs 220V/60Hz. The motor spins, the glue heats, but the feed speed drifts and the bonding temperature never stabilizes. Operators blame the tape, then the glue, then the substrate — while the real issue sits inside the control cabinet. When configuring an edge banding machine production line, the voltage question is the very first item on the checklist, not an afterthought buried in the shipping docs [NEED_CITE: voltage and frequency standards by export market].
Workshops that grow in phases typically start with a panel saw and add edge banding before boring or slotting arrives. The ST-30 sits in that gap: its 38 × 35 × 35 cm footprint means it can be placed beside a sliding table saw without re-routing the entire material flow. The portable form factor lets a small crew reposition the unit as the edge banding machine production line evolves, rather than committing to a fixed conveyor layout too early.
A common mistake is buying a full-function automatic bander that expects upstream panels at a fixed feed height, then discovering the existing saw outputs workpieces at a different elevation. Because the ST-30 is a portable, hand-fed unit, it decouples the edge banding station from rigid conveyor constraints. This flexibility matters when a factory plans to add a multi-boring machine or a CNC router later — the portable bander can be relocated to serve as a secondary or curved-edge station without disrupting the main line.
The 0.3 – 3 mm edge banding thickness range covers the four most common tape materials — PVC, ABS, melamine, and veneer — so a workshop does not need separate machines for different substrates. The glue pot at 1000 ml capacity is sized for intermittent runs typical of small-batch cabinet work; for continuous high-volume runs, a larger automated glue system would be more appropriate. Edge banding height from 0 to 50 mm handles standard 18 mm board as well as thicker solid-wood panels used in premium joinery. Air source pressure between 0.5 and 0.8 MPa must be confirmed against the workshop’s existing compressor — an undersized compressor causes inconsistent pressure on the banding tape, leading to visible glue lines on the finished edge [NEED_CITE: pneumatic supply requirements for edge banding equipment].
I have seen a Colombian cabinet factory stall for an entire week because a newly purchased bander could not keep pace with the upstream panel saw. Panels piled up at the edge banding station, the saw operator had to stop, and the boring machine downstream sat idle. The bander was not defective — it was simply specified without considering the throughput of the surrounding equipment. In a phased edge banding machine production line, every station’s cycle time must be verified against its neighbors before the purchase order is signed [NEED_CITE: production line throughput balancing for woodworking machinery].
The ST-30 is built in a facility that holds ISO 9001 and CE certification, and the four-stage quality check covers incoming material, in-process assembly, finished product, and pre-shipment verification. For the portable bander, this means the glue pot heating element is tested under load, the edge power circuit is verified at the ordered voltage, and the unit is run on sample stock before crating. Custom plug configuration — EU, USA, AU, or UK — is confirmed at the order stage so the machine is ready to plug in on arrival. Engineer-led configuration review ensures the voltage, language, and plug combination matches the destination workshop before production starts.
Tell us the panel materials you cut most often — MDF, plywood, particleboard, or solid wood — along with the board thickness range and whether your edges are straight, curved, or both. Share your local voltage and frequency so we can lock in the correct electrical build. If you are integrating the ST-30 into an existing line, list the upstream and downstream equipment models and their feed speeds so we can verify compatibility before quoting.
Q: How does this portable edge bander integrate with upstream panel saws and downstream boring machines in a phased line?
A: The ST-30 is hand-fed and does not require conveyor synchronization, so it can sit beside any panel saw output height. When you later add boring or slotting stations, the portable unit can be relocated to serve as a secondary curved-edge station without disrupting the main automated flow.
Q: What voltage and plug configuration will be confirmed before production begins?
A: We confirm your local voltage, frequency, and plug type — EU, USA, AU, or UK — at the quotation stage. An electrical schematic is provided for your approval before the machine enters assembly, ensuring the glue pot and motor are wound for your exact supply.
Q: Can the control panel language be customized to match our operators?
A: Yes. The default options are Chinese and English, but the control panel can be customized to Spanish or other languages. Specify the required language during inquiry so the correct firmware is loaded before pre-shipment testing.
Q: What is the recommended layout and spacing when placing this unit within a multi-station production line?
A: Allow clearance on both sides of the 38 × 35 × 35 cm unit for sheet handling, plus space for an operator to feed panels up to the minimum 25 cm length. A stable bench at comfortable working height with nearby air and power connections keeps the workflow smooth.
Q: How do we arrange a sample processing test on our own panel material before committing to an order?
A: Send a small batch of your typical board and edge tape to our facility. We run the ST-30 on your material, document edge quality and glue adhesion, and share the test record with photographs so you can evaluate results before the order is finalized.
* Detailed technical specifications vary by model. Contact us for the full parameter sheet and customization options.
Heavy-duty wooden crate with moisture-proof lining and steel strapping. Seaworthy standard for safe ocean freight.
Standard models: 15-20 working days. Custom OEM orders: 25-35 working days from deposit confirmation.
FOB Qingdao / Tianjin. EXW, CIF available. T/T, L/C, Western Union accepted. Flexible payment terms for long-term partners.
We export to 100+ countries across Europe (Germany, Spain, Italy), Americas (USA, Mexico, Brazil, Argentina), Southeast Asia (Vietnam, Indonesia, Thailand), Africa (Nigeria, Egypt, South Africa), and the Middle East. Full customs documentation and export compliance support included.
Your logo on machine body, control panel and packaging. Full white-label production available.
Support 110V/60Hz, 220V/50Hz, 380V/50Hz, 440V/60Hz and other local electrical standards.
Modify table size, motor power, cutting capacity and other parameters per your production requirements.
Control panel available in English, Spanish, French, Arabic, Russian and other languages on request.
Custom paint color, machine casing design and aesthetic modifications to match your brand identity.
Bundled tooling sets, spare parts kits, installation tools and custom accessories for your market needs.
Fill in your requirements and our sales team will respond within 24 hours with a formal quotation and full technical specifications.
