DW102 Edge Banding Machine, 3800W, 220V/380V customizable — automatic head and tail cutting with vacuum hold-down for stable panel feeding in continuous line setups.
Line-matched throughput — DW102 edge banding system configured against your existing station cycle times to prevent bottlenecking in continuous furniture panel flow.
| Parameter | Value |
|---|---|
| Model | DW102 |
| Product Type | Automatic Edge Banding Machine |
| Total Power | 3800W |
| Voltage | 220V / 380V / customization available |
| Trimming Power | 650W × 2 |
| Polishing Power | 180W × 2 |
| Vacuum Power | 1200W |
| Transmission Power | 60W |
| Edge Banding Height | 0–50 mm |
| Edge Banding Thickness | 0.3–3 mm |
| Minimum Sheet Length | 25 cm |
| Minimum Sheet Width | 5 cm |
| Glue Pot Capacity | 1000 ml |
| Air Source Pressure | 0.5–0.8 MPa |
| Overall Dimensions | 128 × 47 × 69 cm |
| Net Weight | 75 kg |
| Control Language | Chinese, English (customizable to Spanish or other languages) |
| Plug Options | EU, USA, AU, UK |
| Key Features | Curved and straight edge banding, automatic head and tail cutting, edge trimming, polishing, vacuum hold-down |
| Application | Material or Output |
|---|---|
| Cabinet door edge finishing | MDF and particleboard with PVC or melamine banding |
| Custom furniture panel edging | Plywood and blockboard with veneer or polymer strips |
| Wooden door panel profiling | Solid wood panels and polymer door blanks |
| Medium-volume batch production | Furniture and cabinet components requiring curved and straight edge formats |
A machine wired for the wrong supply will sit idle on your floor until an electrician reconfigures the entire panel.
I once watched a furniture factory in the Pearl River Delta accept delivery of an edge bander only to discover the local transformer could not sustain the required amperage during trimming motor startup. The line stalled for days while temporary power was arranged. Specifying 220V or 380V is not a checkbox exercise — it determines whether the vacuum pump, trimming motors, and glue pot heaters can run simultaneously without tripping your breaker. An edge banding machine production line depends on every station receiving stable power, and the DW102 draws from a 3800W total envelope across five distinct motor circuits [NEED_CITE: voltage and frequency standards by export market].
When a panel saw pushes cut boards faster than the downstream banding unit can accept them, panels queue on the transfer table and edge adhesive cools below bonding temperature. The DW102 processes sheets as short as 25 cm and as narrow as 5 cm, which matters when your nesting software produces mixed-size cabinet components in a single batch. Automatic head and tail cutting eliminates the operator pause that typically creates micro-bottlenecks at the infeed. Positioning this unit correctly within an edge banding machine production line requires calculating the average board transit time against your saw cycle output.
Switching between curved door components and straight cabinet sides normally means redirecting panels to a separate manual station or reconfiguring tooling mid-shift. The DW102 handles both profiles without hardware changeover, covering 0–50 mm edge heights and 0.3–3 mm banding thickness. This range accommodates thin PVC for flat-pack carcasses as well as thicker veneer strips for visible door edges, keeping an edge banding machine production line flexible across product families without adding a second machine footprint [NEED_CITE: edge banding material thickness standards for furniture manufacturing].
The dual 650W trimming motors remove overhang on both top and bottom edges in a single pass, which directly affects how tightly panels seat during dowel or confirmat screw assembly. If trimming leaves even a slight lip, adjacent panels in a cabinet carcase will not close flush, and the defect only appears at the packing bench. The 1200W vacuum system clamps panels against the fence during feed, preventing the lateral drift that causes uneven trim depth. For an edge banding machine production line, consistent trim quality at this station prevents compounding tolerance errors downstream at boring and hardware insertion.
Buyers often focus on the main machine parameters and overlook air supply and dust extraction requirements. The DW102 requires 0.5–0.8 MPa air pressure to actuate the head-and-tail cutting cylinder and the trimming pneumatic followers. If your compressor is already near capacity serving other stations, pressure drops will cause incomplete cuts and leave banding tails that jam the polishing wheels. Similarly, without a dedicated dust extraction port connected to your central system, trimming debris accumulates on the feed chain, accelerating wear and degrading panel tracking accuracy over successive shifts [NEED_CITE: compressed air quality standards for pneumatic woodworking tools].
Every unit shipped from the facility undergoes four-stage quality verification — incoming material inspection, in-process assembly checks, finished product testing, and pre-shipment running verification. The DW102 arrives with a factory test record run on your specified substrate and banding material, not a generic demo board. Voltage configuration and plug type are confirmed before the machine enters final assembly, and the control panel language is set to match your operators. An engineer reviews your existing upstream and downstream equipment to recommend infeed height matching and conveyor interface points, reducing the integration work your maintenance team faces on arrival.
Provide your primary panel material, typical sheet dimensions, and the banding thickness range you run most often. Share your existing saw output rate and the conveyor height at the transfer point so we can verify infeed compatibility. Specify your facility voltage, frequency, and preferred control language to ensure the DW102 arrives ready for immediate integration.
Q: How do I confirm the DW102 throughput will match my panel saw and boring machine cycle times?
A: Share your saw output in boards per hour and average panel dimensions. We calculate the transit time through the DW102 at its standard feed rate and compare it against your upstream and downstream stations. If a mismatch appears, we recommend conveyor buffering or feed speed adjustment before the order is finalized.
Q: What electrical information do you need before building my machine?
A: We require your supply voltage, phase configuration, and frequency in hertz. The DW102 is configurable from 220V to 380V with region-specific plug options including EU, USA, AU, and UK standards. An electrical schematic matching your specifications is included in the documentation package before shipment.
Q: Can the trimming and polishing stations handle my mix of PVC and veneer banding?
A: The dual trimming motors and adjustable polishing wheels cover banding from 0.3 mm PVC up to 3 mm veneer. During the factory test, we run your actual banding samples through the DW102 and document edge quality, so you can verify finish standards before the machine leaves the production floor.
Q: What installation clearances and dust extraction connections should I plan for?
A: Allow clearance beyond the 128 × 47 × 69 cm footprint for panel infeed, operator movement, and maintenance access to the trimming and polishing assemblies. Connect the dust extraction port to your central collection system to prevent trimming residue from accumulating on the feed chain and vacuum cups.
* Detailed technical specifications vary by model. Contact us for the full parameter sheet and customization options.
Heavy-duty wooden crate with moisture-proof lining and steel strapping. Seaworthy standard for safe ocean freight.
Standard models: 15-20 working days. Custom OEM orders: 25-35 working days from deposit confirmation.
FOB Qingdao / Tianjin. EXW, CIF available. T/T, L/C, Western Union accepted. Flexible payment terms for long-term partners.
We export to 100+ countries across Europe (Germany, Spain, Italy), Americas (USA, Mexico, Brazil, Argentina), Southeast Asia (Vietnam, Indonesia, Thailand), Africa (Nigeria, Egypt, South Africa), and the Middle East. Full customs documentation and export compliance support included.
Your logo on machine body, control panel and packaging. Full white-label production available.
Support 110V/60Hz, 220V/50Hz, 380V/50Hz, 440V/60Hz and other local electrical standards.
Modify table size, motor power, cutting capacity and other parameters per your production requirements.
Control panel available in English, Spanish, French, Arabic, Russian and other languages on request.
Custom paint color, machine casing design and aesthetic modifications to match your brand identity.
Bundled tooling sets, spare parts kits, installation tools and custom accessories for your market needs.
Fill in your requirements and our sales team will respond within 24 hours with a formal quotation and full technical specifications.
