DW702 High Speed Automatic Edge Banding Machine, 3800W total power, 0.3–3mm edge thickness range, dual 800W trimming motors with integrated polishing and vacuum hold-down.
Engineers configure each station to your line throughput and provide a formal quotation within 24 hours, backed by pre-shipment factory testing with your actual panel material.
Line-Ready Configuration — DW702 integrates into existing conveyor layouts with verified dimensional alignment and utility matching, preventing bottlenecks between upstream sawing and downstream assembly stations.
| Parameter | Value |
|---|---|
| Model | DW702 |
| Product Type | High Speed Automatic Edge Banding Machine |
| Total Power | 3800W |
| Voltage Options | 220V / 380V / Custom |
| Air Source Pressure | 0.4-0.8 MPa |
| Edge Banding Height | 0-50 mm |
| Edge Banding Thickness | 0.3-3 mm |
| Trimming Power | 800W × 2 |
| Polishing Power | 180W × 2 |
| Vacuum Power | 1200W |
| Glue Pot Capacity | 1000 ml |
| Minimum Sheet Length | 250 mm |
| Minimum Sheet Width | 100 mm |
| Overall Dimensions (L×W×H) | 1200 × 550 × 1100 mm |
| Net Weight | 105 kg |
| Control Language | Chinese, English (others customizable) |
| Certifications | CE, ISO 9001 compliant manufacturing |
| Application | Material or Output |
|---|---|
| Cabinet door and carcass production | MDF, particleboard, plywood |
| Custom furniture panel finishing | Blockboard, solid wood panels |
| Polymer door edge sealing | PVC and polymer substrates |
| Medium-volume batch processing | Laminated panels with veneer or PVC edge banding |
Confirming local voltage and frequency before production prevents a machine that arrives electrically incompatible with your facility.
I have walked into factories where a newly delivered edge bander sat idle for weeks because the internal transformer was wired for a different grid standard. The cost isn’t just the rewiring—it is the delayed commissioning, the idle operators, and the rescheduled production runs [NEED_CITE: voltage and frequency standards by export market]. When planning an edge banding machine production line, electrical infrastructure must be verified at the quotation stage, not after the crate arrives.
A production line stalls at its slowest station. The DW702 is specified to sit between a panel saw and a boring machine without becoming that constraint. Its automatic head-and-tail cutting and vacuum hold-down reduce the manual handling between infeed and outfeed, keeping panel flow continuous. When configuring an edge banding machine production line, the goal is balanced output across every station so that no single machine dictates your daily volume.
Many furniture factories begin with one or two core machines and add stations as order volume grows. The DW702 footprint of 1200 × 550 mm and its standardized conveyor height allow it to align with equipment added later. Planning an edge banding machine production line does not require purchasing every station on day one, but it does require that the first machine you buy will physically and electrically integrate with the ones you add next [NEED_CITE: CE machinery directive requirements for industrial equipment].
The dual 800W trimming motors address the most common edge defect: uneven trimming on the top and bottom surfaces simultaneously. When both trimmers engage at matched power, the result is a uniform edge profile that does not require secondary hand-finishing before assembly. The 1000 ml glue pot capacity supports sustained runs without frequent refill stops, and the 0.4–0.8 MPa air requirement must be matched to your compressor output to maintain consistent pressure on the banding material throughout the feed cycle. Panel thickness capability up to 50 mm covers standard MDF and particleboard used in cabinet and furniture carcass production.
Buying a single edge bander without checking its infeed height against your existing conveyor creates a step that operators must manually bridge every cycle. Over thousands of panels, this causes edge damage, operator fatigue, and misalignment that shows up as visible glue lines on finished assemblies [NEED_CITE: common edge banding defects in multi-station lines]. A machine that cannot match the throughput of your upstream saw forces panels to queue, which cools the glue pot below optimal temperature and degrades bond quality on the trailing batch.
In-house manufacturing with patented cutting mechanisms means the trimming and polishing units are designed as an integrated system, not sourced separately and bolted on. The four-stage quality control process covers incoming material through pre-shipment verification, with factory test records generated on your specified panel type before the machine leaves the floor. Voltage, language, and specification customization are treated as standard configuration steps rather than special orders. Engineer-led proposals include line layout consultation so that the DW702 is recommended alongside compatible upstream and downstream stations.
To recommend the correct DW702 configuration for your line, provide your panel material types and typical thickness range, the voltage and frequency standard at your facility, and the feed rate of your upstream panel saw. If you are planning a phased investment, share your intended line layout so we can verify conveyor heights and throughput balance across stations.
Q: How does the DW702 feed speed match upstream panel saws and downstream boring machines?
A: Feed speed must be confirmed against your specific upstream output. We map the throughput of your panel saw and boring machine, then recommend the DW702 configuration that prevents queuing or starvation at the edge banding station. This matching is part of the line layout proposal before order confirmation.
Q: What voltage and frequency configurations are confirmed before shipment?
A: We require your facility’s exact voltage and frequency before production begins. The DW702 supports 220V, 380V, and custom configurations. An electrical schematic confirming the match is included in your pre-shipment documentation package for your electrician’s review.
Q: Can the control panel language be set to match my other line equipment?
A: Chinese and English are standard. Spanish and other languages are configurable. We confirm the required language during the specification stage so that the control interface matches what your operators can read, avoiding commissioning delays caused by unreadable menus.
Q: What footprint and conveyor height details are available for line layout planning?
A: The DW702 measures 1200 × 550 × 1100 mm. A full dimensional drawing with infeed and outfeed conveyor heights is provided in the specification sheet, allowing your layout engineer to verify alignment with adjacent machines before the equipment is manufactured.
Q: Do you provide line layout consultation beyond the edge bander itself?
A: Yes. Our engineers review your full station list, throughput targets, and floor space to recommend phased equipment additions. The goal is ensuring each machine you add later integrates physically and electrically with the DW702 already on your floor.
* Detailed technical specifications vary by model. Contact us for the full parameter sheet and customization options.
Heavy-duty wooden crate with moisture-proof lining and steel strapping. Seaworthy standard for safe ocean freight.
Standard models: 15-20 working days. Custom OEM orders: 25-35 working days from deposit confirmation.
FOB Qingdao / Tianjin. EXW, CIF available. T/T, L/C, Western Union accepted. Flexible payment terms for long-term partners.
We export to 100+ countries across Europe (Germany, Spain, Italy), Americas (USA, Mexico, Brazil, Argentina), Southeast Asia (Vietnam, Indonesia, Thailand), Africa (Nigeria, Egypt, South Africa), and the Middle East. Full customs documentation and export compliance support included.
Your logo on machine body, control panel and packaging. Full white-label production available.
Support 110V/60Hz, 220V/50Hz, 380V/50Hz, 440V/60Hz and other local electrical standards.
Modify table size, motor power, cutting capacity and other parameters per your production requirements.
Control panel available in English, Spanish, French, Arabic, Russian and other languages on request.
Custom paint color, machine casing design and aesthetic modifications to match your brand identity.
Bundled tooling sets, spare parts kits, installation tools and custom accessories for your market needs.
Fill in your requirements and our sales team will respond within 24 hours with a formal quotation and full technical specifications.
