DW802 Automatic Edge Banding Machine, 220V/380V, 0.3-3mm Edge Thickness, 0-50mm Height Range — fully assembled with automatic head and tail cutting, integrated vacuum, and 4000ml glue pot capacity for continuous line operation.
Production-Grade Edge Banding Station — engineered for balanced throughput in complete furniture lines, with voltage and feed specifications confirmed before any machine leaves the factory.
| Parameter | Value |
|---|---|
| Model | DW802 |
| Product Type | Automatic Edge Banding Machine |
| Total Power | 4200W |
| Voltage | 220V / 380V / customization available |
| Edge Banding Height Range | 0–50 mm |
| Edge Banding Thickness Range | 0.3–3 mm |
| Minimum Sheet Length | 250 mm |
| Minimum Sheet Width | 100 mm |
| Glue Pot Capacity | 4000 ml |
| Air Source Pressure | 0.4–0.8 MPa |
| Trimming Power | 800W × 2 |
| Polishing Power | 180W × 2 |
| Edge Feeding Power | 140W |
| Transmission Power | 140W |
| Vacuum Power | 1200W |
| Machine Dimensions (L×W×H) | 1300 × 600 × 950 mm |
| Net Weight | 135 kg |
| Control Panel Language | Chinese, English (customizable) |
| Plug Options | EU, USA, AU, UK |
| Key Features | Edge banding, trimming, polishing, automatic head and tail cutting, integrated vacuum |
| Application | Material or Output |
|---|---|
| Custom cabinet door edging | MDF and particleboard with PVC or veneer banding |
| Panel furniture batch production | Plywood and ecological board up to 50 mm thickness |
| Home decoration component finishing | Solid wood boards requiring polished edge profiles |
| Workshop line integration | Pre-cut panels feeding from sliding table saws |
The edge bander must accept panels at the same working height the saw delivers them.
When I planned my first complete panel line, the panel saw discharged boards at 850 mm and the edge bander accepted at 950 mm. Operators spent every shift lifting panels onto the infeed table. The edge banding machine production line choked not because either machine was slow, but because the transfer height was wrong. That mismatch cost us throughput every single day until we replaced the conveyor section.
Most buyers check feed speed and forget transfer geometry. The DW802’s working height and 1300 × 600 mm footprint need to align with upstream saws and downstream boring stations so panels move without manual lifting [NEED_CITE: typical conveyor height standards in panel furniture factories]. In a phased line build, this station should be specified alongside — not after — the cutting equipment.
A panel saw that cuts 40 boards per hour means nothing if the edge bander can only process 25. The DW802 handles minimum sheet dimensions of 250 mm by 100 mm, which covers most cabinet components and small furniture parts. When planning the edge banding machine production line, the daily batch mix — large wardrobe panels versus small shelf boards — determines whether this station keeps pace or becomes the constraint.
The 0.3–3 mm edge thickness range and 0–50 mm height capacity cover standard PVC, ABS, and veneer tapes used in custom furniture. This means the same machine can run different jobs back-to-back without tooling changes, keeping the line moving through mixed production schedules typical of custom cabinet shops.
Central air supply is one of the most overlooked utilities in line planning. This station requires 0.4–0.8 MPa, which must be factored into the factory’s compressor sizing alongside the panel saw’s dust extraction and the boring machine’s pneumatic clamps [NEED_CITE: compressed air demand calculation for multi-station woodworking lines]. If the compressor undershoots, edge trimming quality degrades mid-shift.
Total power draw of 4200W at 220V or 380V should be confirmed against the factory’s distribution panel before the machine ships. Voltage mismatch is the single most common reason a new station sits idle for weeks after delivery. The DW802 supports voltage customization and multiple plug standards, so the electrical specification must be locked during the quotation stage, not at the packing stage.
The glue pot holds 4000 ml, which determines how long the machine runs between refills. In a continuous production run, a small pot forces operators to stop the line for glue top-ups, breaking the cadence between upstream cutting and downstream boring. This capacity supports sustained batch runs on standard EVA hot-melt adhesives without frequent interruption.
Trimming power of 800W per motor provides adequate torque for clean cuts on 3 mm PVC and wood veneer edges at typical feed speeds. Underpowered trimming motors leave burrs that require manual cleanup, adding a hidden station to what was supposed to be a closed loop. The dual polishing motors at 180W each finish the edge to assembly-ready condition.
Integrated vacuum at 1200W captures trimming waste directly at the cutting zone. In a connected edge banding machine production line, this reduces material buildup on the conveyor and prevents offcuts from jamming downstream transfer points — a practical detail that matters more than it appears on a spec sheet.
I have seen furniture plants buy a panel saw in January and an edge bander in June from different suppliers, only to discover the feed directions were opposite. Panels had to be rotated 180 degrees by hand between stations. That rotation step added labor and scratched panel surfaces.
When the DW802 is specified as part of a line rather than a standalone purchase, feed direction, conveyor height, and air supply connections are planned together. Piecemeal purchasing saves money upfront and costs far more once production starts [NEED_CITE: rework costs from mismatched woodworking line equipment]. The minimum sheet width of 100 mm also means narrow strips from the saw can be edged without a separate manual station.
In-house manufacturing means the DW802 is built and tested in the same facility where line layouts are designed, so conveyor heights and transfer points are confirmed before shipment.
Four-stage quality control covers incoming components, in-process assembly, finished product testing, and pre-shipment verification — each machine runs actual panel stock before crating.
Voltage, plug type, and control panel language are configured per order, so operators in different export markets can read the interface on day one.
Engineer-led line configuration recommendations are provided within 24 hours of inquiry, matching this edge banding station to your existing saws and borers on throughput data.
Factory visits allow buyers to run their own panel samples through the complete station and verify edge quality before committing to a line order.
When requesting a quotation for this station within a larger line, provide the panel materials you run most frequently, the daily volume target, and your existing upstream equipment models. Confirm your facility voltage and frequency, and specify the operator language for the control panel. If you are building the line in phases, note which stations are already installed so the DW802 can be matched to their feed height and throughput.
Q: How do I match the DW802 feed speed with upstream saws for balanced line throughput?
A: Provide your panel saw model and its actual cycle time per cut. We use that data to confirm whether the DW802 keeps pace or needs a buffer conveyor between stations. Balanced throughput depends on the full batch mix, not just the fastest single operation. Line balancing calculations are included with every formal quotation.
Q: What electrical and air infrastructure does this edge banding station need within the line?
A: The DW802 draws 4200W and requires 0.4–0.8 MPa compressed air. We confirm voltage and frequency before production so the motor and control system match your supply. Air demand should be calculated alongside all other pneumatic stations in the line to avoid compressor undersizing mid-shift.
Q: Can the DW802 be added later in a phased line investment starting with cutting?
A: Yes. We record your saw discharge height and panel dimensions during the initial cutting station order, so the edge bander is pre-configured for transfer compatibility when you are ready to add it. This prevents the height and feed-direction mismatches that plague piecemeal line builds.
Q: How does the 4000 ml glue pot capacity affect shift planning on a continuous line?
A: A full pot supports extended runs on standard EVA adhesive before refill is needed. For high-volume single-shift operations, we recommend scheduling one refill during the mid-shift break to avoid unplanned stops. Refill procedure and heating recovery time are covered in the operator manual.
Q: What layout considerations apply when placing this edge bander between cutting and assembly?
A: Allow clearance on both sides for panel infeed from the saw and discharge toward the boring or assembly area. The 1300 × 600 mm footprint fits standard line aisles. Feed direction, conveyor height, and vacuum duct routing are confirmed in the line layout drawing provided with each quotation.
* Detailed technical specifications vary by model. Contact us for the full parameter sheet and customization options.
Heavy-duty wooden crate with moisture-proof lining and steel strapping. Seaworthy standard for safe ocean freight.
Standard models: 15-20 working days. Custom OEM orders: 25-35 working days from deposit confirmation.
FOB Qingdao / Tianjin. EXW, CIF available. T/T, L/C, Western Union accepted. Flexible payment terms for long-term partners.
We export to 100+ countries across Europe (Germany, Spain, Italy), Americas (USA, Mexico, Brazil, Argentina), Southeast Asia (Vietnam, Indonesia, Thailand), Africa (Nigeria, Egypt, South Africa), and the Middle East. Full customs documentation and export compliance support included.
Your logo on machine body, control panel and packaging. Full white-label production available.
Support 110V/60Hz, 220V/50Hz, 380V/50Hz, 440V/60Hz and other local electrical standards.
Modify table size, motor power, cutting capacity and other parameters per your production requirements.
Control panel available in English, Spanish, French, Arabic, Russian and other languages on request.
Custom paint color, machine casing design and aesthetic modifications to match your brand identity.
Bundled tooling sets, spare parts kits, installation tools and custom accessories for your market needs.
Fill in your requirements and our sales team will respond within 24 hours with a formal quotation and full technical specifications.
